Cooling Tower Treatment Chemicals

Approx. Rs 140 / KilogramGet Latest Price

Cooling Water Antiscalants or Scale Inhibitors are chemical compounds that inhibit or prevent scale formation in the heat exchanger by means of sequestering calcium and magnesium salts, dispersing silica, chelating iron and breaking-up colloidal deposits like clay and silt that are otherwise formed in the heat exchanger. Antiscalants that are effective - are profitable for users for its round the year savings of power and labor, and increase in production. Use of anti-scalant is a prime necessity to meet up with the huge production targets. Cooling Water Antiscalants are normally fed continuously to the re-circulating water. It can be injected by chemical dosing pump or fed directly to the CT sump (basin). The amount of antiscalant required to inhibit scale formation depends on the quality of feed water and plant operating conditions.

Approx. Rs 140 / KilogramGet Latest Price

Oxidizing biocides are used to control microbiological activity in a wide range of commercial cleaning, environmental hygiene, disinfection, industrial and process water treatment activities. They are often used in combination with non-oxidizing biocides to provide complete system control. When discussing biocides a distinction should be made between the biocide active substance and the biocide product. The biocide active substances are mostly chemical compounds, but can also be microorganisms (e.g. bacteria). Biotical products contain one or more biocide active substances and may contain other non-active co-formulates that ensure the effectiveness as well as the desired pH, viscosity, color, odour, etc. of the final product. Biocide products are available on the market for use by professional and/or non-professional consumers.

Approx. Rs 140 / KilogramGet Latest Price

Non-oxidizing biocides describe special chemical agents that function by mechanisms other than oxidation, including interference with cell metabolism and structure. In smaller systems, the use of non oxidizing biocides has remained an industry standard. However, because a single biocide is usually not as effective as chlorine, two or more different products are normally needed to achieve adequate microbial control. Contrary to popular belief, cooling water microorganisms do not become immune to non oxidizing biocides. 

Approx. Rs 140 / KilogramGet Latest Price

Algaecide is a polymeric, cationic biocide that has been developed for controlling the growth of algae, bacteria, and fungi in recirculating water systems such as cooling towers, evaporative condensers, closed cooling water systems and industrial air-washing systems. The cationic charge on the active compound forms an electrostatic bond with negatively charged sites on the cell wall of micro-organisms. The stresses caused by this bond lead to cell lysis and death of the cell. It also distorts the permeability of cell wall thus reducing the normal flow of nutrients to the cell leading to cell death due to protein denaturation.  

Approx. Rs 140 / KilogramGet Latest Price

The accumulation of microbiological slimes, biofilm and general bio-fouling in cooling water systems reduces system efficiency, increases operating and maintenance costs. If ignored leads to under deposit and pitting type of corrosion. Our synthetic organic Biodispersant is effective in removing dead algal and slime mass from cooling system. It has a capacity to penetrate inside the thick algae mats on the cooling tower deck or fills and help the biocide to penetrate the biomass. It also has a deterrent effect and it cleans the system on line. Generally it is dosed prior to biocide or along with biocide to enhance its efficacy.

Approx. Rs 140 / KilogramGet Latest Price

The unwanted accumulation of scale and detrimental impact of metallic corrosion can be significant issues that affect the operation and maintenance of open and closed cooling water systems. To ensure that such open and closed cooling systems are well maintained and operate at optimum efficiency it is essential that the correct water conditions are maintained at all times. This can be achieved using carefully selected scale and corrosion inhibitors designed specifically for such cooling systems.

Additional Information:

• Delivery Time: 3-4 Days