Boiler Water Treatment Chemical

Approx. Rs 150 / KilogramGet Latest Price

Product Details:

The primary reasons for chemical cleaning of boilers / heat exchangers are to prevent tube failures & improve unit availability. Tube failures in low pressure boilers/heat exchangers are normally the results of creep which occurs when internal deposits produce excessive metal temperature. A relatively smaller quantity of deposit creates difficulties in high pressure boilers. Caustic corrosion & hydrogen damage, which occur only in the presence of deposits, may cause tube failures at temperatures well below the creep limit. Deposits originating both from fabrication & during operation should be considered potential problems. DESCALING CHEMICAL is a liquid preparation with Acid base, designed to dissolve industrial deposits without affecting metals. IT is supplied in fully inhibited & concentrated form & is to be diluted with water for use.

Approx. Rs 60 / KilogramGet Latest Price

Product Details:

The treatment of water for steam generation is one of the most significant branches of water chemistry. Industries use steam, either in the process or generating power. Generation of steam is energy intensive and costly, therefore efficient production and utilization of steam is a prerequisite to keep over all cost of production down. Strategy for the boiler water treatment should be to use the boiler that operates with the highest efficiency for the longest possible time Boiler water should be treated properly to prevent pitting/corrosion, scaling and carryover even hot blast of tubes. Using some of the specific result oriented additives can prevent these problems to facilitate fast, safe & reliable steam generation.

Approx. Rs 140 / KilogramGet Latest Price

Product Details:

The Boiler Boil out Chemical is used for boil-out applications in boilers. The chemicals are composed from best grade constituents to ensure superior removal of foulants such as grease, oil from the internals of boilers. These highly caustic chemicals clean the contaminants, which impair heat transfer and may cause tube failure. It softens the scale deposited on the internal surface of boiler and ensures its efficient removal.

Approx. Rs 210 / KilogramGet Latest Price

Product Details:

An oxygen scavenger is a chemical substance that is used to reduce or completely remove oxygen in fluids and enclosed spaces to prevent oxygen-induced corrosion. It is also known as an oxygen absorber. It is used as a corrosion inhibitor in oil and gas production installations, packaging, production separation and seawater injection systems. Oxygen scavengers increase the shelf life or service life of the components under protection. Oxygen scavengers are categorized as organic or inorganic. They are applied in various ways, depending on: The amount of oxygen to be removed, The expense commitment, Characteristics and field conditions, Ability to passivity metallic surface

Approx. Rs 100 / KilogramGet Latest Price

Product Details:

Scale inhibitors (SIs) are a class of specialty chemicals that are used to slow or prevent scaling in water systems. Oilfield scaling is the precipitation and accumulation of insoluble crystals (salts) from a mixture of incompatible aqueous phases in oil processing systems. Scale inhibitors can never deliver all the benefits of softened water. ... These can be magnetic, electrolytic or electronic devices and do not change the chemical composition of the water, although a physical change may take place

Approx. Rs 140 / KilogramGet Latest Price

Product Details:

A corrosion inhibitor is a chemical compound that, when added to a liquid or gas, decreases the corrosion rates of a material, typically a metal or an alloy. The effectiveness of a corrosion inhibitor depends on fluid composition, quantity of water, and flow regime. The Corrosion Inhibitor is a chemical compound, which is used for degrading the corrosion rate on metal surface of industrial equipments. Corrosion Inhibitor are formulated to minimize the more.. We are among the prestigious suppliers, traders and exporters of Culminate Corrosion Rust Inhibitors in the industry.

Approx. Rs 100 / KilogramGet Latest Price

Product Details:

pH Booster Chemicals by Bionics Advanced Filtration Systems perform control of pH and alkalinity levels in boiler water and drinking water helping your systems achieves greater working performance and long service life. We supply pH booster chemicals for industrial boilers, steam raising plant, RO drinking water systems and dm plant. We offer various types of pH booster chemicals that are odorless and non-toxic in nature. Working as alkaline reacting water softening agents, these chemicals provide corrosion protection to feed water tank, lines, pumps and other parts by forming suitable sludge in removing principle hardness of boiler feed water.